Tri-S Industries - Operable Walls

Moduflex® Series 600 full 4" (102mm) thick operable walls for general purpose applications have high density panel faces laminated to metal frames providing strength, mass, and stability.
The Series 600 models below have all or most of the following features. Click on the highlighted model above for specific features for that model:

Walls are available to 24' (7315mm) high.

Acoustically rated to Sound Transmission Class (STC) 52.

Class A panels have non-combustible, high density faces machine pressure laminated to one-piece, unspliced metal frames. Bronze finish, deep-nesting, interlocking vertical panel edges and horizontal operable seals are made of steel for extra impact strength. Panels have continuous vertical and horizontal acoustical seals that are carefully aligned and placed in a double row labyrinth for optimum acoustical performance.

14-guage steel formed suspension brackets on tall panels.

Hydraulically dampened bottom seals with 1-1/2" (38mm) clearance.

Choice of top Manuseals®, Autoseals®, or Sweepseals®.

All seal mechanisms are outside the panel frames for access for serviceability.

Steel astragals protect panel edges and conceal the seals mechanisms.

7-guage all-steel overhead tracks with all-steel ball-bearing wheels, massive welded steel track brackets for continuously-hinged, electrically operated models.

Aluminum track with integral metal soffits and the same all-steel wheels or fibre reinforced tired, steel ball-bearing wheels.

Rugged, reliable, field-adjustable, acoustical pass doors with optional Autocloser® hydraulic door closers, exit (panic) hardware and photo-luminescent exit signs.

Deluxe expandable closure panels with exclusive high-torque mechanisms function reliably on walls to 24'(7315mm)in height.

MULTI-DIRECTIONAL INDIVIDUAL PANEL OPERATION
Moduflex®Model 610MD (Multi Directional) operable walls have carriers and overhead supporting track designed to allow the individual panels to negotiate 90 degree intersections. This design is used primarily for using panels in alternate locations.

PRE-PROGRAMMED INDIVIDUAL PANEL OPERATION
Moduflex® Model 610PP (Pre-Programmed) operable walls have carriers and overhead supporting track designed to make up openings and store the same way every time. This design is the easiest, quickest and surest way to set up the walls.

PAIRED-PANEL OPERATION
Moduflex® Model 620 operable walls have panels hinged in groups of two, each panel supported by radial type, steel ball-bearing wheels, which allow convenient, manual operation and center stacking.

CONTINUOUSLY HINGED PANEL OPERATION
Moduflex® Model 640 operable walls have continuously hinged panels. Alternate panels are supported by trucks of four radial type steel ball-bearing wheels. Electrically operated, and center stacking, these models are ideal for high, expansive areas or where remote operation is required.