SR
9000
Applications
-
The SR 9000 Standard Heavy Duty insulated impact traffic doors are designed for applications where carts or motorized pallet jacks are used to transport goods from one area to another.
-
Good for all pedestrian, carts and motorized pallet jacks in a dry storage, refrigerated or wash down environments.
Limitations
The SR 9000 series is good for most applications excluding man ridden
fork lift traffic, put this door to the test.
SR 9000 FX
Applications
-
Good for all pedestrian, carts, motorized pallet jacks and man ridden forklift traffic in a dry storage, refrigerated or wash down environments.
-
The SR 9000 FX series is available with all the same options and specifications as the SR 9000 with the exception of added internal steel reinforcements and corner gussets to handle man ridden fork lift traffic.
-
For a forklift operation, the width of the opening must be a minimum of 36" wider than the load going through the opening, and the wider the better. We recommend 96" to 120" openings for forklift use.
-
Limiting posts must be mounted at 90 degree locations each side of door opening to validate SR 9000 FX warranty. See Limiting post location chart.
Features & Advantages
All SR 9000 doors feature a patent pending 1/8" ABS outer shell
forming a 1 7/8" thick panel that will retain its physical properties
to -40°C.
The SR 9000 door body is impervious to moisture, acid, petroleum products, animal fats, rodents, insects and salt solutions.
Cores are foamed in place high density non-CFC urethane bonded to the outer shell producing an "R" factor of 12.18.
SR 9000 doors are known for their construction of lightweight yet rugged materials, as well as their ease of maintenance and long service life. This allows them to open easily, operate smoothly and allow for safe, damage-free passage of personnel and equipment.
Perimeter edges are bull nosed with a minimum 5/16" radius to prevent excessive wear on the edges all mounted to an internal welded steel perimeter with corner gussets. Gasket keys are molded in place and retain gasketing without the use of screws, rivets or other fasteners. Replacement of gasketing is simple and easily done on site.
Standard single pane or optional double pane vision panels are available in three standard sizes based on door panel width. See SR 9000 Vision Panel Chart. They are made of 1/8" clear polycarbonate set in a black vacuum formed frame all sealed to the door panel. Vision Panels are mounted at 60" center line from finished floor as standard or to meet ADA requirements upon request.
All SR 9000 Insulated Impact Traffic Doors operate on the CMI Stainless Steel "V" cam gravity hinging system complete with bottom hinge pin assembly.
Options & Colors
Optional polyethylene spring bumpers, impact plates, partial edge
gasketing, lower hinge guards and double pane vision panels are all available.
All add years to the life of your door without compromising fit or finish.
The SR 9000 is available in your choice of 14 standard colors, see ABS color chart for your choice.
Color
Chart
Diagram
D: Spring Bumpers and Impact Plates
Installation & Maintenance
The SR 9000 Series are conveniently packaged ready to install upon
delivery in existing or factory supplied frames. Easy-to-follow instructions
along with thread forming fasteners are included in every package.
These require only periodic cleaning with a strong industrial soap or detergent. Regular lubrication of moving parts is also recommended.
Warranty
A three-year hinging system and one-year panel warranty against door
panel breakage is offered on the SR 9000 FX Industrial Doors subjected to
worker-ridden vehicle traffic with the use of limiting posts. All SR 9000
series carry a three year hinging and two year panel warranty against door
panel breakage. All warranties stipulate correct installation and sizing requirements.
Order Fulfillment
Most orders are filled within a 3 to 4 week period. All orders are
FOB Winnipeg, MB. Prepaid freight is available at extra cost.
