SR 1240
Applications
The SR 1240 Flexible Door is designed for retail, commercial,
institutional and industrial applications where thermal or visual separation
is required.
Good for all pedestrian, carts or motorized traffic in a dry storage or wash down environments.
Limitations
Not recommended for refrigerated and freezer areas, or where heavy wind or
excessive air pressure is present.
Features & Advantages
The SR 1240 flexible door panels are constructed with heavy duty,
abrasion resistant, textured vinyl material. Door panels are made flexible
with two rows of fiberglass stays that allows the doors to absorb impact,
open easily and close automatically. They are built to take abuse and look
good doing it!
This series operates on the top jamb mounted only CMI return hinging system leaving full width-in-clear for load passage, no bottom hinge to get damaged or maintain.
Doors are custom built to your own specific requirements and can be ordered up to 48” x 120” for singles and pairs up to 96” x 120”, special sizes and options are never a problem.
Standard vision panels are 15” x 14” clear vinyl centered in the door panel and up 60” form the finished floor. Optional vision panel configurations and sizes available upon request.
Door panels are sized to allow a 3” overlap at the center of bi-parting doors.
If balloon jamb edge seals and wipers at top and bottom are required please specify the SR 1240G.
Options and Colors
Optional impact plates are available upon request. Please consult
the factory for sizes and locations of impact plates for ultimate door protection.
Model SR 1240 are available in 8 standard colors, Red, Navy blue and Chocolate Brown, Dolphin Gray, Metallic Gray, Forest Green, Beige and Black. Optional colors available upon request.
Installation & Maintenance
The SR 1240 Series are conveniently packaged ready to install in
existing or factory supplied frames. Easy-to-follow instructions are included.
These doors require only periodic cleaning with an industrial soap or detergent. Regular lubrication of the moving parts is recommended.
Warranty
The Model SR 1240 carries a TEN year hinging system & one year panel warranty
against faulty materials and workmanship. All warranties stipulate correct
installation and sizing requirements.
Order Fulfillment
Most orders are filled within a 2 to 4 week period. All orders are FOB
Winnipeg. Prepaid freight is available.
SR 1300
Applications
The SR 1300 flexible door is designed where a thermal
and or visual separation is required. Packing plants, food processing facilities,
cold storage warehousing and produce terminals are some of the many users
of the SR 1300 door.
Good for all pedestrian, carts or heavy motorized traffic in extreme low temperature, dry goods or wash down environments.
Limitations
Not recommended where heavy wind or excessive air pressure is present.
Features & Advantages
The Model SR 1300 is the right door
for the toughest applications.
The SR 1300 flexible door panels are constructed with food grade approved 2 ply belting material that is abrasive resistant. Both layers are bonded without the use of rivets or stitching.
This series operates on the top mounted only CMI Return Hinging System leaving the full width clear for load passage, no bottom hinge to get damaged or maintain.
Doors are custom built to your own specific requirements to suit your opening dimensions, special sizes and options are never a problem.
Standard vision panels are 15" x 14" clear vinyl centered in the door panel and up 60" from the finished floor. Optional vision panel configurations and sizes available upon request.
Door panels are sized to allow a 3" overlap at the center of bi parting doors.
Wiper seals are provided at the top and bottom, and on the jamb sides of each panel.
Options and Colors
Optional impact plates are recommended in areas of heavy
use for one side or both sides of the door panel. Please consult the factory
for sizes and locations of impact plates for ultimate door protection.
The SR 1300 Series is available in Food Grade approved GREEN only.
Installation & Maintenance
The SR 1300 Series are conveniently packaged ready to
install upon delivery in existing or factory supplied frames. Easy-to-follow
instructions are included.
These doors require only periodic cleaning with an industrial soap or detergent. Regular lubrication of the moving parts is recommended.
Warranty
The Model SR 1300 carries a TEN year hinging system and one-year panel warranty
against faulty materials and workmanship. All warranties stipulate correct
installation and sizing requirements.
Order Fulfillment
Most orders are filled within a 2 to 4 week period. All orders are FOB Winnipeg.
Prepaid freight is available at extra cost.
